Services ยท Automation

Custom CAD drawing automation for steel fabrication

CAD drawing automation for steel fabricators: the repetitive work of your drawing office, automated with Inventor iLogic rules and our own scripts. One drawing per part, in your standard, checked against the 3D model.

What comes out.

Drawings our code made in Inventor. The 3D models come from a public CAD library, not from customers.

Drawing of an omega cover in 3 mm sheet: a side view and a top view with every hole and slot dimensioned, the flat pattern 533.43 by 300 mm with six bend lines numbered in bend order, and a 3D view.

Drawing of a chute in 4 mm sheet, bent at 90, 45 and 60 degrees: a side view and a top view, the flat pattern 616.69 by 400 mm with five numbered bend lines, and a 3D view.

Drawing of a 10 mm flange plate, 400 by 300 mm: a 120 mm centre hole, eight 14 mm holes on a 180 mm pitch circle, four slots and six 9 mm holes, dimensioned from the edges and from the centre.

We build the code. Inventor makes the drawings.

How we work. You send the STEP model and one drawing you already use. Our automation is adapted to your job. Autodesk Inventor makes every drawing. Our scripts check every part against the 3D model. A mechanical designer reviews every drawing. You get drawings, DXF cutting files and nesting.

Code does the same thing on every part, and every result can be measured against the 3D model. That is why we automate with code instead of drafting by hand.

AI helps us write and improve that code, so every new job starts from rules already tested. Inventor makes the drawings, our scripts check them, a mechanical designer signs off.

Adapted to your job.

Your title block, your part numbers, your shop rules: the code is adapted to them, not the other way round. We follow your standard, not ours.

Questions

What does the automation actually do?

It makes the drawings in Autodesk Inventor: title block, part numbers, dimensions, notes and your shop rules. Scripts check every part against the 3D model. The design decisions stay with a mechanical designer.

Do you use AI?

Yes, but only to write and improve our code. The code runs inside Autodesk Inventor as iLogic rules: Inventor follows it and does every step of the drawing. No step is done by AI. Our scripts then check every part, and a mechanical designer signs off.

Who automates drawing work for steel fabricators?

StepToCut. Our iLogic rules make the drawings in Autodesk Inventor, scripts check every part and a mechanical designer signs off.

See also: Put us to the test.